Viscometer Constant Temperature Water Bath

 Viscometer Constant Temperature Water Bath 

1.Product Introduction:

        Viscometer constant temperature water bath, also called viscometer thermostat, is a low temperature thermostat for the use of viscometer. The Φ70 opening of the viscometer constant temperature water bath TF-DC-0506W can hold the breaker of 200ml, and fixed by the fixed frame. The liquid temperature in the tank can be passed directly to the tested sample, and the rotor of the rotational viscometer can be conveniently placed in a breaker for testing.

        粘度计恒温水浴槽也称为粘度计恒温槽，是专为粘度计配套使用的低温恒温槽。粘度计恒温水浴槽TF-DC-0506W，Φ70的开口可以放200ml的烧杯，并由固定架固定。槽内的液体温度直接传递给被测试样，旋转粘度计的转子可方便地放入烧杯内进行测试。

2.Feature Of product

(1)The machine is adopted with microcomputer temperature control, PID adjustment and self - tuning control technology, so its temperature control  accuracy is high.

(2)Sensor open circuit display function.

(3)Liquid level alarm function

(4)The inner mixing pump of the table all adopt 304 stainless steel and it is well-made.

(5)The refrigerating system of totally enclosed air-cooled compressor has the advantage of automatic protection of overheat and overload, rapid cooling rate and low noise.

(6)The machine adopts non-fluorine environmental protection technology, which meets the environmental requirement.

(7)The machine can rise and drop the temperature rapidly and reliably.

(8) Setting and testing temperature can be displayed by two digital windows.

(9)The working tank adopts high quality stainless steel material.

(1)采用微机温控PID调节、自整定控制技术，控温精度高；

(2)有传感器开路显示功能；

(3)有液位报警功能；

(4)台板内胆搅拌泵等全部采用优质304不锈钢材料，做工精良；

(5)全封闭风冷式压缩机制冷系统具有过热，过载自动保护，降温快，噪音小；

(6)采用无氟环保制冷技术，符合环保要求

(7)升降温快速、稳定、可靠；

(8)设定温度和测量温度用二只数字窗口分别显示；

(9)工作槽内胆采用优质不锈钢材料

3.Product Usage:

        DC series low temperature thermostat bath is widely used in bioengineering, medicine, food, chemistry, metallurgy, oil and other fields. The machine can provide users a high-precision, controlled, temperature-uniform and constant field. It is an ideal thermostatic bath for institute, colleges and universities,factory laboratory and measure quality inspection department.

        DC系列低温恒温槽广泛适用于生物工程、医药、食品、化工、冶金、化学分析、石油等领域，为用户提供一个高精度的、受控的、温度均匀的恒定场源，是研究所、高等院校、工厂实验室、质检部门理想的恒温槽。

5.Technical Parameter:

6.Environmental Requirement

(1).The thermostatic bath should be placed on a sturdy work table.

(2).No vibrations and harmful gas.

(3).The room temperature should be relatively stable, not fluctuant, otherwise it will affect temperature control accuracy. The room temperature should be set at about 25℃,(especially the thermostatic bath of -40℃, -65℃ and -80℃). If the room temperature is too high, it will affect the heat dissipation of compressor, low the refrigerating efficiency and easy to cause troubles.

(4)Thermostatic bath requires constant upkeep, especially when cooling rate slows down after working for some time. You should discharge the plastic sheet of the thermostatic and clean the dust on compressor and heating panel.

(1)恒温槽应放置在坚固的工作台上；

(2)无震动，无有害气体；

(3)室温温度应相对稳定，不能忽高忽低，否则影响控温精度；室温应该在25℃左右，（特别是-40℃、-65℃、-80℃的恒温槽），过高的室温会影响压缩机散热，降低制冷效率，且容易引起故障；

(4)恒温槽应定期保养，特别是工作一段时间后感觉降温速度放慢，应卸下恒温槽的塑料网板，清除压缩机、散热板的灰尘。