Shanghai TianFeng industrial Co., LTD
Air-Cool Screw Chiller Unit Single-Unit 1(Room Temperature Screw Chiller)
The installation and maintenance of the air-cool screw chiller is simple and easy. Because it dose not dispense with cooling tower system, only need to connect with freezing water pipe. The equipment does not occupy special machine room, so wearing parts are few and maintenance probability is low.
风冷螺杆式冷水机安装维护简捷,没有省却冷却塔系统,只须连接冷冻水管路;且不占用专用机房,易损件极少,维修概率低。
1.Technical Parameter Sheet(Air-Cool Chiller Unit Room Temperature Single-Unit 1)
Model |
TFA- |
||||||||||||
90.1 |
120.1 |
155.1 |
165.1 |
210.1 |
225.1 |
265.1 |
280.1 |
305.1 |
330.1 |
||||
Nominal Refrigeration Capacity |
KW |
90 |
120 |
155 |
165 |
210 |
225 |
265 |
280 |
305 |
330 |
||
104Kcal/h |
8 |
10 |
13 |
14 |
18 |
19 |
23 |
24 |
26 |
28 |
|||
Operating And Control Mode |
Automatic Control Of PLC Programmable Controller |
||||||||||||
Power Supply |
380V/3N~/50Hz |
||||||||||||
Total Power |
kW |
28.6 |
38.1 |
48 |
53.1 |
66.8 |
71.1 |
79.3 |
84.2 |
91.9 |
100.6 |
||
Whole Machine Running Current |
A |
50.1 |
66.7 |
84 |
92.9 |
116.9 |
124.4 |
138.8 |
147.4 |
160.8 |
176.1 |
||
Compressor |
Type |
5-6 Asymmetrical Semi-Enclosed Twin-Screw Compressor |
|||||||||||
Startup Type |
Y-△ Start-Up |
||||||||||||
Capacity Regulator |
0-33-66-100% |
0-25%-50%-75%-100% |
|||||||||||
Refrigeration Capacity |
kW |
26.8 |
35.4 |
44.4 |
48.7 |
60.2 |
64.5 |
72.7 |
76.4 |
84.1 |
91.8 |
||
Refrigeration Current |
A |
46.9 |
62 |
77.7 |
85.2 |
105.4 |
112.9 |
127.2 |
133.7 |
147.2 |
160.7 |
||
Evaporator |
Type |
Horizontal Shell And Tube Dry Evaporator |
|||||||||||
Water Field |
m3/h |
15.5 |
20.7 |
26.7 |
28.4 |
36.1 |
38.7 |
45.6 |
48.2 |
52.5 |
56.8 |
||
Pipe Diameter |
DN |
65 |
65 |
80 |
80 |
100 |
100 |
100 |
100 |
100 |
125 |
||
Water Pressure Drop |
kPa |
44 |
45 |
47 |
49 |
50 |
50 |
50 |
50 |
52 |
55 |
||
Condenser |
Type |
Hydrophilic Aluminum Foil Set With High Efficiency Internal Thread Copper Tube Fin Type |
|||||||||||
Wind Field |
m3/h |
34200 |
45600 |
58900 |
62700 |
79800 |
85500 |
100700 |
106400 |
115900 |
125400 |
||
Condensing Shaft Fan |
Quantity |
|
6 |
6 |
8 |
8 |
6 |
6 |
6 |
6 |
6 |
8 |
|
Power Per Unit |
kW |
0.3 |
0.45 |
0.45 |
0.55 |
1.1 |
1.1 |
1.1 |
1.3 |
1.3 |
1.1 |
||
Overall Dim.
|
Long |
mm |
2450 |
2750 |
2950 |
3200 |
3200 |
3200 |
3200 |
3200 |
3550 |
4400 |
|
Width |
mm |
1350 |
1400 |
1400 |
1500 |
2200 |
2200 |
2200 |
2200 |
2200 |
2200 |
||
Height |
mm |
2020 |
2020 |
2200 |
2200 |
2300 |
2300 |
2300 |
2350 |
2350 |
2350 |
||
Unit Weight |
kg |
1850 |
2000 |
2400 |
2600 |
2800 |
2950 |
3100 |
3300 |
3550 |
3750 |
||
Operating Weight |
kg |
2000 |
2200 |
2600 |
2900 |
3100 |
3180 |
3350 |
3600 |
3900 |
4100 |
Remark:
1.Cooling Condition:Cold Water Input Temperature 12℃, Cold Water Output Temperature 7℃;Environment Temperature 35℃.
2.The water side pressure of evaporator and condenser is 1.0mpa.
3.The water side fouling factor of evaporator under nominal working condition is 0.018m2•℃/kW.
4.Except the specifications and requirements above, Shanghai Tianfeng chiller manufacturer can provide non-standard chillers according to customer demands.
注:
1.制冷工况:冷水进水温度12℃,出水温度7℃,环境温度35℃;
2.蒸发器和冷凝器的水侧设计承受压力为1.0MPa。
3.名义工况中蒸发器水侧污垢系数为0.018m2•℃/kW;
4.除上述规格和要求外,上海田枫冷水机厂家可根据客户要求提供非标产品。