Product Type And Formulation Of Lyophilizers

Product Type And Formulation Of Lyophilizers

     Products are manufactured in the lyophilized form due to their instability when in solution. Many of the antibiotics, such as some of the semi-synthetic penicillins,cephalosporins, and also some of the salts of erythromycin, doxycycline and chloramphenicol are made by the lyophilization process. Because they are antibiotics, low bioburden of these formulations would be expected at the time of batching. However, some of the other dosage forms that are lyophilized, such as hydrocortisone sodium succinate, methylprednisolone sodium succinate and many of the biotechnology derived products, have no antibacterial effect when in solution. 

      For these types of products, bioburden should be minimal and the bioburden should be determined prior to sterilization of these bulk solutions prior to filling. Obviously, the batching or compounding of these bulk solutions should be controlled in order to prevent any potential increase in microbiological levels that may occur up to the time that the bulk solutions are filtered (sterilized). The concern with any microbiological level is the possible increase in endotoxins that may develop. Good practice for the compounding of lyophilized products would also include batching in a controlled environment and in sealed tanks, particularly if the solution is to be held for any length of time prior to sterilization. 

      In some cases, manufacturers have performed bioburden testing on bulk solutions after prefiltration and prior to final filtration. While the testing of such solutions may be meaningful in determining the bioburden for sterilization, it does not provide any information regarding the potential formation or presence of endotoxins. While the testing of 0.1 ml samples by LAL methods of bulk solution for endotoxins is of value, testing of at least 100 ml size samples prior to prefiltration, particularly for the presence of gram negative organisms, would be of greater value in evaluating the process. For example, the presence of Pseudomonas sp. in the bioburden of a bulk solution has been identified as an objectionable condition.